NOLO X-Loader (v1.4.14, Jun  3 2010)
Secondary image size 98592
Booting secondary
[   0.000] Nokia OMAP Loader v1.4.14 (Jun  3 2010) running on Nokia N900 S4.0 GP (RX-51)
[   0.002] I2C v3.12
[   0.003] System DMA v4.0
[   0.003] OneNAND device ID 0040, version ID 0121 (256 MiB, 66 MHz)
[   0.005]   OneNAND blocks unlocked in 2448 us
[   0.005]   Flash id: ec4021
[   0.007] Partition table successfully read
[   0.008] TWL4030 PWR ISR: 01
[   0.008] Forcing power key boot reason (R&D flag set)
[   0.008] Reset reason: pwr_key
[   0.008] McSPI v2.1
[   0.009] ERROR: LP5523 not found
[   0.010] SMB138C: Not loading driver (version reg. 0x49)
[   0.010] BQ24150 (rev. 1) found on I2C bus 1, address 0x6b
[   0.010] SSI version 1.0
[   0.010] Battery voltage 6.012 V, BSI: 0
[   0.010] Disabling charging (R&D flag set)
[   0.010] Initializing LCD panel
[   0.010]   Detecting LCD panel moscow
[   0.011]     Panel ID: 101234
[   0.011]   Detected LCD panel: acx565akm
[   0.011] DISPC: version 3.0
[   0.014]   LCD pixel clock 24000 kHz
[   0.014]   Logo drawn in 4 ms (14625 kB/s)
[   0.128]   er-cool backlight fade-in took 113 ms
[   0.128] Initializing USB
[   0.129]   No USB host detected
[   0.129] Loading kernel image info
Loading kernel (1961 kB)... done in 33 ms (58435 kB/s)
[   0.162] Loading initfs image info
[   0.162] Total bootup time 201 ms
[   0.162] Serial console enabled


U-Boot 2023.04-00817-g9e804638bf (Apr 15 2023 - 01:14:30 +0100)

OMAP35XX-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 MHz
DRAM:  256 MiB
omap_gpmc_cs_map: invalid chip-select mask address (0x0)
Core:  12 devices, 8 uclasses
WDT:   Started rx51_watchdog with servicing every 1000ms (31s timeout)
NAND:  Muxed OneNAND 256MB 1.8V 16-bit (0x40)
OneNAND version = 0x0121
Chip support all block unlock
Chip has 2 plane
Scanning device for bad blocks
OneNAND: 256 MiB
MMC:   omap3_mmc_write: Read-only register 0x00013c
SD: ACMD41 in a wrong state
switch to partitions #0, OK
mmc1 is current device
SD: ACMD41 in a wrong state
switch to partitions #0, OK
mmc1 is current device
226 bytes read in 14 ms (15.6 KiB/s)
Running boot.scr from mmc 1:1 ...
## Executing script at 86008000
Failed to load 'plan9.ini'
3585784 bytes read in 260 ms (13.2 MiB/s)
## Booting kernel from Legacy Image at 80020000 ...
   Image Name:   9n900
   Image Type:   ARM Plan 9 Kernel Image (uncompressed)
   Data Size:    3585720 Bytes = 3.4 MiB
   Load Address: 80020000
   Entry Point:  80020000
   Verifying Checksum ... OK
   Loading Kernel Image
## Transferring control to Plan 9 (at address 80020000) ...
Plan 9
127 holes free
0x80394000 0x83610000 52936704
52936704 bytes free
omap2_inth_write: Bad register 0x000068
cpu0: 600MHz ARM Cortex-A8
256M memory: 54M kernel data, 201M user, 959M swap
bootfs: Thu Apr 27 16:26:56 GMT 2023
fingerprint: ab50abe4bd93817c2730d9205f464e9910da8817

bootargs is (tcp, tls, il, local!device)[]